• QuadBlaast XP-G coming
• MiniBlaast With cree XP-G LEDs
• iBlaast II
• Blaast II DCM
• Blaast II in-line

These advanced high powered LED light systems has been designed for all mountain bikers, endurance sports & adventure racers. 

Used in endurance races around the globe, & awesome as a commuter light!

This light can be made in several formats to suit your unique needs. Check out the configuration options. Fully assembled or you choose the parts.

Run times of 6+ hours with a  pocket size Li-ion 4.4Ah battery on full power and out to 70+ hours on low power walk/run mode or 3 hours full power, 35 hours low with a micro sized 2.2Ah Li-ion pack.
Perfect for multi-day events.

Suitable for-
Adventure racing, 12/24hr racers, multi-sporters, MTB, road cyclists, & rogaining/orienteering.

• Configuration options
• Specifications
• DIY
• Pricing

Features-

• Up to 1000 Lumens at full power!. Over 1200 with XP-G
• 3x Cree R2 LEDs with full switch mode current regulation for maximum run times
• Upgradeable LED light source. Future proof
• Precision Tri-optics for a superior spread
• Edit & choose from 2 or 3 stage dimming. Set your own power levels- all user editable on the fly
• Multistage fuel gauge that tells you what your battery is doing (Can be disabled) & deep cycle battery protection 
• Day time use flasher modes including SOS
• Helmet mount or bar mount
• Runs from any 12V through to 14.8V battery supply
• Built tough & looks good
• Better performance than a HID lamp.

• Sets a new standard in rear lighting
• Cree Red LEDs
• Available with two or three red LEDs.
• Brightest rear light on the market!
• Feed through battery supply available.Male/female connectors. Fits right in.
• Admin mode to set own output levels & battery type etc
• 'On' modes
• Flashing low power 
• Flashing VERY high power
• Fuel gauge battery protect
• Operates from 12V to 18V.
  
  
  

Suitable for-
Weekend warriors,12/24hr racers, Multi-sporters, MTB, road cyclists

Features-

• 2 or 3 stage dimming
• 5 stage fuel gauge
• Flasher modes inc SOS
• Soft start for lamp protection
• Compatible with SLA, NiMH, or Li-ion batteries. 12 to 14.8V
• 20 or 35W IRC lamps
• Run time 2+ hours on full power to 4.5 hours on low
• Rapid helmet mount comes standard, bar mount optional

View full details here

• Options
• DIY
• Specifications

View full details here

• Options
• DIY
• Specifications
  
  

• Compatible with SLA, NiMH, or Li-ion batteries.
• Run times of 2+ hours with a 14.8V 4.4Ah 495gm Li-ion battery on full power. 
• 20 or 35W IRC halogen lamps.
• Very suitable for Li-ion 'over driving'. Bright!
• Rear mounted on/off switch
• Glows red out the back
• Fast helmet mounting standard
• Upgradeable to electronics at any time.

Simple single switch operation and solid state LED reliability.

Suitable for-
Emergency services, ski fields, helicopter landing sites and more.

View full details here

• Options
• Specifications

• Portable, light weight and built strong.
• Fits on to helmets, bar mounts or handheld.
• Ruggedised housing for the switch mode electronic controller.
• Full dimming functions, fuel gauge, flashing modes.
• Helmet mounting standard
• Select from red/blue or amber/green strobe.
• Fully customizable for any application

Fitted with Cree R2 LEDs. XP-G LEDs available.

Suitable for-
Caving

View full details here

• Options
• Specifications

• Run times out to 70 hours with a Li-ion 4.4Ah pack
• Works from many battery types. 12V to 14.8V
• Wide beam spread for excellent peripheral vision
• Rugged housing for the switch mode electronic controller
• Full dimming functions 
• Fuel gauge 
• User selectable power settings
   

Fitted with Cree R2 LEDs.

Cree MCE LEDs available.

Suitable for-
Hunting

• Options
• Specifications

• Different configurations available
• Run times out to 70 hours with a Li-ion 4.4Ah pack
• Works from many battery types. 12V to 14.8V
• Wide beam spread for excellent peripheral vision
• Rugged housing for the switch mode electronic controller
• Full digital functions available or on/off
• Fuel gauge available
• User selectable power settings
   

• Comet Pro 
• Comet Pro DCM
• Blaast! LED lights
  
  All the parts you require. You don't have to spend hours finding the bits. 
  Instructions for Blaast! DCM kits supplied on CD-ROM.
   
  Need some parts & boards? 
  Barrels, lamps, LEDs, switch mode driver boards, connectors, optics, end caps, cables, and more.

We can supply any lighting component or everything. Just ask!

Suitable for-
DIY'ers & hobbyists everywhere.
Commuters, 12/24hr racers, multi-sporters, MTB, road cyclists.

View full details here

• Options
• Specifications
  

Features-
We have done the running around and drilled all the holes.

Some kits made within the hour. Have them sent to your work and ride that night!

LED kit requires a reasonable ability to identify, fit & solder components etc. PCB comes loaded and tested.

Spare 3M Dual Lock.
Provides a very rapid 'snap on' mount with greater flexibility in positioning. For rapid mounting of your light on to your handlebars.

Replacement halogen lamps. 
IRC 50mm 20 & 35W for Comet Pro lights.

35mm lamps also available.
10, 20 or 35W. 12V.

Features-
Lightweight polycarbonate with high strength.
3M Dual Lock for fast mounting.

• Options
• Specifications
  

• Options
• DIY
• Specifications