iBlaast II 
The iBlaast II has the control module intergrated to the light head.
Suits both bar & helmet mounting. 
The iBlaast II has full function dimming, admin mode, flasher modes, fuel gauge & battery protect, and you can set the low, medium, & high (700ma or 1000ma) output levels with this model for personalised operation .
First choice for MTB, road cyclists & commuters.  
Now outfitted with Cree R2 LEDs. The Kiwi is the switch. 
Made in New Zealand.

Operating instructions for the iBlaast II here.
New admin mode. Over temperature alarm now fitted. Comes after the fuel gauge. Set for 3-5 flashes (70, 80, or 90 deg).

iBlaast II with 2.2Ah 12V SLA battery & smart charger Comes with tilting helmet mount 1.75 to 25 hours run time Upgradeable battery type Only  $399. Enquire now.

iBlaast II DCM  
All the digital features as above but supplied in our Digital Control Module format. Choose this for all applications, bar or helmet mounted. Fully featured and high performance. DCM straps to your hydration/back pack straps. Standard team issue. The kiwi is the switch. See iBlaast II instructions above for use and features. Comes with tilting helmet mount.
    

iBlaast II in-line
Same digital functions as the iBlaast II, but module is located in-line. Less cabling than the DCM version. Position the control module close to the battery and place it in your rear shirt pocket.

Blaast II  
This Blaast II uses a high efficiency switch mode driver with no advanced options like fuel gauge/flasher modes etc. But we have set the drive current at 1000ma (Can supply at 700ma) for the maximum brightness. Simple on/off switch. Comes in the DCM & in-line module format.
For those who want the most light and minimum extras. 
Huge Cree R2 LED power! 

Optional flood optics available.

MiniBlaast.  Now with XP-G LEDs

The MiniBlaast light is in the 35mm (MR-11) format. 
Reduced in size but not in power.
3x Cree XP-G LEDs with single tri-optic. Increased light output & improved run times.
Available in DCM format. Lightest head unit with digital control at chest height.

Full digital features including

• Two or three stage dimming  

• Set own power levels

• Fuel gauge 

• Battery protection

• Flashing modes

• Over temperature alarm

• Tilting mount

  NZ$369
  US$249
  UK £139
  Euro €160

QuadBlaast
  
The QuadBlaast light is in the 35mm (MR-11) format. 
4x Cree XP-G LEDs with single quad-optic for outright power.
Requires at least a 14.4V Li-ion battery or similar. 4.4Ah for best results. Will not run off 12 or 13.2V.
Available in DCM format. Lightest head unit with digital control at chest height.

Full digital features including

• Two or three stage dimming  

• Set own power levels

• Fuel gauge 

• Battery protection

• Flashing modes

• Over temperature alarm

• Tilting mount

• Extreme light output at full power

• Optional flood optics available

NZ$389
US$259
UK £145
Euro €170

DIY kits- For details on individual parts, optics, barrels & components- click here 

Digital kitsets use the bFlex switchmode controller. The bFlex has been loaded with Nightlightnings bike specific code offering all the features and simple operation. The high level current can be selected from 700ma, 1000ma, or 1200ma. Set your own output levels, fuel gauge, battery protect & flasher modes.
The fuel gauge uses the primary LEDs for notification.
We supply the bFlex already prewired and tested. Then coated with plasticoat for weather protection.

DIY kits come complete with all the parts except Loctite or thermal paste. Instructions are provided on a CD-ROM if required. 
The control module comes pre-loaded and tested. You finish the rest.
Some knowledge of soldering components, component identification/orientation, and assembly skills required. Approximate time to assemble around 1 to 2 hours. All holes etc are predrilled.

Now available in 2 configurations-  DCM, or with an in-line control module.
We welcome sales of any parts of the Blaast! DIY kit. If you have your own LED, optics, or control board, you can purchase the rest to finish your project. Our alloy barrels fit both the Luxeon and SSC range of LEDs. Just ask us for what you need. More DIY options here.

      

System componentry

• Cree R2 LEDs fitted to the iBlaast II

• Cree XP-G LEDs fitted to the MiniBlaast & QuadBlaast light heads 

• Fully upgradeable as the technology advances

• High efficiency intergrated optics. 12 deg standard, 25 deg flood available

• Replaceable front plate

• Standard polycarb bracket or tilting mount  

• Durable double coated alloy barrel with optimised ventilation

• UV stabilised thermal plastic end cap

• Stainless fasteners for long life

• Sensitive membrane switch

• Weather sealed cable entry

• Built tough
  

Specifications

• bFlex high efficiency switch mode regulator operating in constant current mode for 
  maximum run time

• Super charged controller with 1200ma capacity for future use

• Atmel 10Mh ATTiny 85 High-performance low-power AVR ® 8-bit Micro controller

• In-System Programmable via SPI Port for future software upgrades.

• Reverse polarity protection 

• iBlaast I & Mini-Blaast will work with any 12V to 18V battery. (Absolute Max 20V)

• Quad-Blaast runs from 14.8V to 18V battery packs

• All digital lights feature a 'sleep' mode when not in use.

Admin mode

Simple but fully featured.
The admin mode provides the most versatile set up for any LED light system anywhere, and is selected by connecting the battery and then holding down the switch within three seconds.
Select from the options to customise all the digital Blaasts performance.

• 2 or 3 stage dimming. Low/high or low/medium/high beam.

• Vary the output level of the low or medium settings.

• Fix the high level at either 700ma or 1000ma

• Select the fuel gauge type to suit whatever battery you run with. 12V - 14.8V

• Select over temp alarm threshold.

• For dual head sets, select which  is the primary head & select the order of LED turn on.

The Blaast II comes pre-set, so you can connect battery & ride immediately.

Approximate power draw  

Here is a guide to the current drain with a battery voltage of 14.8V when stepping through the user selectable levels in the admin mode (iBlaast II).

• Current measured in milliamps. (ma)

• This is an indication only and some values in production will vary.

Approx run time for the iBlaast & Mini-Blaast 

Battery type	High power 700ma	Low power
Li-ion 14.8V 2.2Ah 295gm	4 Hours	38 hours
Li-ion 14.8V 4.4Ah 495gm	7 hours	90 hours
NiMH 13.2V 4Ah 685gm	6 hours	72 hours
SLA 12V 2.2Ah 950gm	1.45 hours	25 hours

Pricing (International pricing subject to exchange rate. Contact us for the latest prices) 8/4/09.

	NZ$	UK£	US$
DIY
Blaast II DIY. Simple operation on/off. DCM format only	$259	£109	$183
Blaast II  DCM DIY (Digital)	$289	£119	$219
Blaast II In-line DIY (Digital)	$289	£119	$219
25 deg flood optics for all Blaast! series lights (SSC LEDs)	6.00	2.85	4.85
25deg flood Tri-optics for Cree LEDs	15.00
Tri-Blaast digital DIY.  3x Cree R2 LEDs	$319
Quad-Blaast digital DIY. 4x Cree R2 LEDs	$339
Assembled (Digital)
iBlaast II Smart operation (Cree R2 LEDs & tri-optics)	$369	£119	$180
iBlaast II DCM  (Cree R2 LEDs & tri-optics)	$389	£125	$190
iBlaast II in-line (Cree R2 LEDs & tri-optics)	$369	£119	$180
Mini-Blaast. Smart digital operation	$369
Quad-Blaast. Fully featured with huge output	$389
Assembled on/off control only (Non-digital)
iBlaast II DCM. 3x Cree R2 LEDs & Tri-optics, tilt mount.	$359	£139	$249
Add your battery & charger. Prices are only valid with the purchase of a light.
SLA	NZ$	UK£	US$
SLA 2.2Ah 12V battery & smart charger	$79
SLA 4Ah 12V battery & smart charger	$79
NiMH
NiMH 13.2V 4Ah Sanyo battery & fast smart charger	$288
Li-ion
Li-ion 2.2Ah 14.8V battery & fast smart charger. 270gms. Canadian cells	$288	£109	$217
Li-ion 4.4Ah 14.8V battery & fast smart charger. 475gms. Canadian cells	$358	£138	$278
Accessories
Tilting mount for retro fitting to iBlaast lights	$28	£12	$19
In-car adaptor for NiMH & Li-ion chargers	$12	£7	$10
Handle bar mount	$20	£8	$15
Universal helmet adaptor for thinned ribbed helmets	$10	£5	$8
Replacement battery or light connector	$3.50	£1	$2
Cap mount plastic adaptor. Suitable for fixing the iBlaast on to caps	$10	£5	$8
For detailed battery & charger information click here